
New customer
Are you new to Kennametal? Create an account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InShip-to
Change Account
New customer
Are you new to Kennametal? Create an account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InShip-to
Change Account
successfully added to cart
View Cart
View Cart
Notifications
Mark all as readWorkpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
S
High-Temp Alloys
H
Hardened Materials
Features and benefits
- Designed for trochoidal milling with low radial engagement and full length of cut.
- With chip deformers for ideal chip evacuation at high surface quality.
- Proprietary flute form reduces vibrations and improves tool life.
- Helix angle tailored to minimize vibration and optimize tool life.
- Front end geometry designed for maximum tool life in helical and ramping operations.
Machine Side
loading...
Workpiece Side
loading...
Grades
-
KC643M
Coated fine-grain grade with PVD multilayer (AlTiN). KC643M™ is a very thin and hard PVD coating particularly suited for cutting steel, cast iron, stainless steel (wet), and titanium (wet). This grade can be used for materials with hardness up to 52 HRC.
P SteelS High-Temp AlloysH Hardened MaterialsK Cast IronM Stainless Steel
KOR5™ DS • 5 Flutes • 5 x D • Adjustment factor table for feed calculation • Metric
Ae/D1 | 0.50% | 1.00% | 1.50% | 2.00% | 4.00% | 5.00% | |
Speed factor | Kv | 2.00 | 1.97 | 1.93 | 1.38 | 1.03 | 1.00 |
Feed factor | KFz | 1.27 | 1.18 | 1.14 | 1.09 | 1.05 | 1.00 |
KOR5™ DS • 5 Flutes • 5 x D • Application Data • Metric
Material Group | KC643M | Recommended feed per tooth (fz = mm/th) for side milling (A). | |||||||||||
A | Cutting Speed vc m/min | D1 Diameter | |||||||||||
ap | ae | min | max | mm | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | |||
P | 0 | 5 x D | 0,05 x D | 150 | – | 540 | fz | 0,097 | 0,117 | 0,134 | 0,163 | 0,185 | 0,200 |
1 | 5 x D | 0,05 x D | 150 | – | 540 | fz | 0,097 | 0,117 | 0,134 | 0,163 | 0,185 | 0,200 | |
2 | 5 x D | 0,05 x D | 140 | – | 513 | fz | 0,097 | 0,117 | 0,134 | 0,163 | 0,185 | 0,200 | |
3 | 5 x D | 0,05 x D | 120 | – | 432 | fz | 0,081 | 0,098 | 0,114 | 0,141 | 0,164 | 0,184 | |
4 | 5 x D | 0,05 x D | 90 | – | 405 | fz | 0,073 | 0,087 | 0,101 | 0,124 | 0,143 | 0,158 | |
5 | 5 x D | 0,05 x D | 60 | – | 270 | fz | 0,065 | 0,078 | 0,091 | 0,113 | 0,131 | 0,147 | |
6 | 5 x D | 0,05 x D | 50 | – | 202,5 | fz | 0,054 | 0,065 | 0,075 | 0,092 | 0,105 | 0,115 | |
M | 1 | 5 x D | 0,05 x D | 90 | – | 310,5 | fz | 0,081 | 0,098 | 0,114 | 0,141 | 0,164 | 0,184 |
2 | 5 x D | 0,05 x D | 60 | – | 216 | fz | 0,065 | 0,078 | 0,091 | 0,113 | 0,131 | 0,147 | |
3 | 5 x D | 0,05 x D | 60 | – | 189 | fz | 0,054 | 0,065 | 0,075 | 0,092 | 0,105 | 0,115 | |
K | 1 | 5 x D | 0,05 x D | 120 | – | 405 | fz | 0,097 | 0,117 | 0,134 | 0,163 | 0,185 | 0,200 |
2 | 5 x D | 0,05 x D | 110 | – | 378 | fz | 0,081 | 0,098 | 0,114 | 0,141 | 0,164 | 0,184 | |
3 | 5 x D | 0,05 x D | 110 | – | 351 | fz | 0,065 | 0,078 | 0,091 | 0,113 | 0,131 | 0,147 | |
S | 1 | 5 x D | 0,05 x D | 50 | – | 243 | fz | 0,081 | 0,098 | 0,114 | 0,141 | 0,164 | 0,184 |
2 | 5 x D | 0,05 x D | 25 | – | 108 | fz | 0,043 | 0,052 | 0,060 | 0,075 | 0,087 | 0,099 | |
3 | 5 x D | 0,05 x D | 25 | – | 108 | fz | 0,043 | 0,052 | 0,060 | 0,075 | 0,087 | 0,099 | |
4 | 5 x D | 0,05 x D | 50 | – | 162 | fz | 0,060 | 0,072 | 0,084 | 0,104 | 0,120 | 0,135 | |
H | 1 | 5 x D | 0,05 x D | 80 | – | 378 | fz | 0,073 | 0,087 | 0,101 | 0,124 | 0,143 | 0,158 |
2 | 5 x D | 0,05 x D | 70 | – | 324 | fz | 0,054 | 0,065 | 0,075 | 0,092 | 0,105 | 0,115 |
-
KOR™ Series End Mills: Solid End Mills for Dynamic Milling
-
KOR™5DS