Sold in pkg. of 0
New customer
Are you new to Kennametal? Create an account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InNew customer
Are you new to Kennametal? Create an account and get started.
Create AccountRegistered User
already have an account? Sign in.
Sign InView Cart
Notifications
Mark all as readWorkpiece Materials
Features and benefits
- HPC point geometry for highest performance in cast iron.
- Four margin lands ensure hole straightness.
- Large corner radius to prevents chipping and reduces exit burs when drilling through holes.
- Through coolant.
Machine Side
Workpiece Side
Grades
-
KC7410
Composition: Multilayered PVD AlCrN-based coated fine-grain carbide.
Application: First choice for cast iron. Due to the uniquely developed coating, this grade exhibits extraordinary wear resistance in abrasive materials offering the highest material removal rates.K Cast Iron
Toleranz • metrisch | |
D1 metrisch | Toleranz k8 |
6 | 0,000/+0,018 |
6–10 | 0,000/+0,022 |
10–18 | 0,000/+0,027 |
18–26 | 0,000/+0,033 |
Toleranz • Zoll | |
D1 Zoll | Toleranz k8 |
0.2362 | 0.0000/+0.0007 |
0.2362–0.3937 | 0.0000/+0.0009 |
0.3937–0.7087 | 0.0000/+0.0011 |
0.7087–1.0236 | 0.0000/+0.0013 |
Material Group | Cutting Speed vc | Metric | |||||||||
Range m/min | Recommended Feed Rate per Rev | ||||||||||
min | Starting Value | max | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | |||
K | 1 | 100 | 175 | 200 | mm/r | 0,14 0,34 | 0,16 0,39 | 0,19 0,45 | 0,23 0,50 | 0,26 0,58 | 0,3 0,64 |
2 | 100 | 160 | 180 | mm/r | 0,14 0,34 | 0,16 0,39 | 0,19 0,45 | 0,23 0,50 | 0,26 0,58 | 0,3 0,64 | |
3 | 70 | 85 | 120 | mm/r | 0,13 0,27 | 0,15 0,33 | 0,17 0,37 | 0,19 0,42 | 0,21 0,46 | 0,28 0,54 |
Material Group | Cutting Speed vc | Inch | |||||||||
Range SFM | Recommended Feed Rate per Rev | ||||||||||
min | Starting Value | max | .315 | .394 | .472 | .551 | .630 | .787 | |||
K | 1 | 330 | 570 | 660 | IPR | 0.005 0.013 | 0.006 0.015 | 0.007 0.017 | 0.009 0.019 | 0.010 0.022 | 0.011 0.025 |
2 | 330 | 520 | 590 | IPR | 0.005 0.013 | 0.006 0.015 | 0.007 0.017 | 0.009 0.019 | 0.010 0.022 | 0.011 0.025 | |
3 | 230 | 280 | 390 | IPR | 0.005 0.010 | 0.005 0.013 | 0.006 0.014 | 0.007 0.016 | 0.008 0.018 | 0.011 0.021 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Metrisch | |||||||||||
Bereich m/min | Empfohlener Vorschub pro Umdrehung | ||||||||||||
min. | Startwert | max. | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
P | 0 | 70 | 125 | 175 | mm/U | 0,09–0,18 | 0,10–0,21 | 0,12–0,24 | 0,14–0,30 | 0,18–0,36 | 0,23–0,42 | 0,27–0,48 | 0,28–0,50 |
1 | 70 | 120 | 170 | mm/U | 0,09–0,18 | 0,10–0,22 | 0,12–0,24 | 0,14–0,30 | 0,18–0,36 | 0,23–0,42 | 0,27–0,48 | 0,28–0,50 | |
2 | 90 | 135 | 180 | mm/U | 0,09–0,18 | 0,10–0,25 | 0,12–0,27 | 0,14–0,33 | 0,18–0,39 | 0,23–0,45 | 0,27–0,51 | 0,28–0,50 | |
3 | 60 | 95 | 130 | mm/U | 0,09–0,16 | 0,10–0,28 | 0,11–0,29 | 0,13–0,33 | 0,17–0,37 | 0,22–0,41 | 0,28–0,45 | 0,30–0,46 | |
4 | 50 | 90 | 130 | mm/U | 0,09–0,16 | 0,10–0,28 | 0,11–0,29 | 0,13–0,33 | 0,17–0,37 | 0,22–0,41 | 0,24–0,45 | 0,25–0,46 | |
5 | 30 | 65 | 100 | mm/U | 0,09–0,15 | 0,10–0,18 | 0,10–0,22 | 0,11–0,27 | 0,15–0,32 | 0,19–0,37 | 0,23–0,42 | 0,24–0,43 | |
6 | 40 | 60 | 80 | mm/U | 0,09–0,15 | 0,09–0,18 | 0,10–0,22 | 0,10–0,27 | 0,15–0,32 | 0,19–0,37 | 0,23–0,42 | 0,24–0,43 | |
M | 1 | 20 | 55 | 90 | mm/U | 0,07–0,12 | 0,08–0,13 | 0,08–0,14 | 0,10–0,18 | 0,12–0,22 | 0,15–0,26 | 0,18–0,27 | 0,19–0,28 |
2 | 30 | 60 | 90 | mm/U | 0,07–0,12 | 0,08–0,13 | 0,08–0,16 | 0,10–0,18 | 0,12–0,22 | 0,15–0,26 | 0,18–0,27 | 0,19–0,28 | |
3 | 20 | 40 | 60 | mm/U | 0,07–0,12 | 0,08–0,12 | 0,08–0,14 | 0,10–0,16 | 0,12–0,22 | 0,15–0,26 | 0,18–0,27 | 0,19–0,28 | |
K | 1 | 80 | 140 | 200 | mm/U | 0,11-0,26 | 0,13-0,32 | 0,15-0,44 | 0,18-0,49 | 0,25-0,58 | 0,29-0,64 | 0,35-0,70 | 0,36-0,75 |
2 | 80 | 130 | 180 | mm/U | 0,11–0,26 | 0,13–0,31 | 0,15–0,36 | 0,18–0,40 | 0,25–0,48 | 0,29–0,60 | 0,35–0,70 | 0,36–0,75 | |
3 | 70 | 95 | 120 | mm/U | 0,10-0,22 | 0,12-0,25 | 0,15-0,35 | 0,16-0,40 | 0,20-0,48 | 0,26-0,60 | 0,30-0,63 | 0,32-0,65 | |
S | 1 | 10 | 20 | 30 | mm/U | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,13 | 0,10–0,15 | 0,11–0,17 | 0,12–0,19 | 0,13–0,21 |
2 | 10 | 20 | 30 | mm/U | 0,05-0,09 | 0,06-0,10 | 0,07-0,12 | 0,08-0,13 | 0,10-0,15 | 0,11-0,17 | 0,12-0,19 | 0,13-0,21 | |
3 | 15 | 25 | 35 | mm/U | 0,05–0,09 | 0,06–0,10 | 0,07–0,12 | 0,08–0,13 | 0,10–0,15 | 0,11–0,17 | 0,12–0,19 | 0,13–0,21 | |
4 | 20 | 30 | 40 | mm/U | 0,04-0,07 | 0,05-0,09 | 0,05-0,10 | 0,07-0,12 | 0,08-0,13 | 0,08-0,13 | 0,09-0,15 | 0,10-0,17 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Zoll | |||||||||||
Bereich SFM | Empfohlener Vorschub pro Umdrehung | ||||||||||||
min. | Startwert | max. | .236 | .315 | .394 | .472 | .630 | .787 | .945 | 1.023 | |||
P | 0 | 230 | 410 | 570 | IPR (Zoll/U) | .004–.007 | .004–.008 | .005–.009 | .006–.012 | .007–.014 | .009–.016 | .011–.019 | .011–.020 |
1 | 230 | 390 | 560 | IPR (Zoll/U) | .004–.007 | .004–.009 | .005–.009 | .006–.012 | .007–.014 | .009–.016 | .011–.019 | .011–.020 | |
2 | 300 | 440 | 590 | IPR (Zoll/U) | .004–.007 | .004–.010 | .005–.011 | .006–.013 | .007–.015 | .009–.018 | .011–.020 | .011–.020 | |
3 | 200 | 310 | 430 | IPR (Zoll/U) | .004–.006 | .004–.011 | .004–.011 | .005–.013 | .007–.015 | .009–.016 | .011–.018 | .012–.018 | |
4 | 160 | 300 | 430 | IPR (Zoll/U) | .004–.006 | .004–.011 | .004–.011 | .005–.013 | .007–.015 | .009–.016 | .009–.018 | .010–.018 | |
5 | 100 | 210 | 330 | IPR (Zoll/U) | .004–.006 | .004–.007 | .004–.009 | .004–.011 | .006–.013 | .008–.015 | .009–.016 | .009–.017 | |
6 | 130 | 200 | 260 | IPR (Zoll/U) | .004–.006 | .004–.007 | .004–.009 | .004–.011 | .006–.013 | .008–.015 | .009–.016 | .009–.017 | |
M | 1 | 70 | 180 | 300 | IPR (Zoll/U) | .003–.005 | .003–.005 | .003–.006 | .004–.007 | .005–.009 | .006–.010 | .007–.011 | .008–.011 |
2 | 100 | 200 | 300 | IPR (Zoll/U) | .003–.005 | .003–.005 | .003–.006 | .004–.007 | .005–.009 | .006–.010 | .007–.011 | .008–.011 | |
3 | 70 | 130 | 200 | IPR (Zoll/U) | .003–.005 | .003–.005 | .003–.006 | .004–.006 | .005–.009 | .006–.010 | .007–.011 | .008–.011 | |
K | 1 | 260 | 460 | 660 | IPR (Zoll/U) | .004-.010 | .005-.013 | .006-.017 | .007-.019 | .010-.023 | .011-.025 | .014-.028 | .014-.030 |
2 | 260 | 430 | 590 | IPR (Zoll/U) | .004–.010 | .005–.012 | .006–.014 | .007–.016 | .010–.019 | .011–.024 | .014–.028 | .014–.030 | |
3 | 230 | 310 | 390 | IPR (Zoll/U) | .004-.009 | .005-.010 | .006-.014 | .006-.016 | .008-.019 | .010-.024 | .012-.025 | .013-.026 | |
S | 1 | 30 | 70 | 100 | IPR (Zoll/U) | .002–.004 | .002–.004 | .003–.005 | .003–.005 | .004–.006 | .004–.007 | .005–.008 | .005–.008 |
2 | 30 | 70 | 100 | IPR (Zoll/U) | .002-.004 | .002-.004 | .003-.005 | .003-.005 | .004-.006 | .004-.007 | .005-.008 | .005-.008 | |
3 | 50 | 80 | 110 | IPR (Zoll/U) | .002–.004 | .002–.004 | .003–.005 | .003–.005 | .004–.006 | .004–.007 | .005–.008 | .005–.008 | |
4 | 70 | 100 | 130 | IPR (Zoll/U) | .002-.003 | .002-.004 | .002-.004 | .003-.005 | .003-.005 | .003-.005 | .004-.006 | .004-.007 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Metrisch | ||||||||||||
Bereich m/min | Empfohlener Vorschub pro Umdrehung | |||||||||||||
min. | Startwert | max. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
P | 0 | 95 | 125 | 175 | mm/U | 0,10 0,19 | 0,11 0,22 | 0,13 0,30 | 0,15 0,37 | 0,17 0,41 | 0,19 0,45 | 0,24 0,52 | 0,28 0,60 | 0,29 0,62 |
1 | 90 | 130 | 170 | mm/U | 0,10 0,19 | 0,11 0,22 | 0,13 0,30 | 0,15 0,37 | 0,17 0,41 | 0,19 0,45 | 0,24 0,52 | 0,28 0,60 | 0,29 0,62 | |
2 | 100 | 140 | 180 | mm/U | 0,10 0,19 | 0,11 0,26 | 0,13 0,34 | 0,15 0,41 | 0,17 0,45 | 0,19 0,49 | 0,24 0,56 | 0,28 0,64 | 0,29 0,62 | |
3 | 60 | 100 | 130 | mm/U | 0,10 0,17 | 0,11 0,31 | 0,12 0,36 | 0,14 0,41 | 0,16 0,44 | 0,18 0,46 | 0,23 0,51 | 0,30 0,56 | 0,31 0,58 | |
4 | 60 | 100 | 130 | mm/U | 0,10 0,17 | 0,11 0,31 | 0,12 0,36 | 0,14 0,41 | 0,16 0,44 | 0,18 0,46 | 0,23 0,51 | 0,25 0,56 | 0,26 0,58 | |
5 | 60 | 80 | 100 | mm/U | 0,09 0,16 | 0,10 0,22 | 0,11 0,28 | 0,12 0,34 | 0,14 0,37 | 0,16 0,40 | 0,20 0,46 | 0,24 0,52 | 0,25 0,54 | |
6 | 60 | 70 | 80 | mm/U | 0,09 0,16 | 0,10 0,22 | 0,11 0,28 | 0,12 0,34 | 0,14 0,37 | 0,16 0,40 | 0,20 0,46 | 0,24 0,52 | 0,25 0,54 | |
K | 1 | 80 | 120 | 170 | mm/U | 0,12 0,21 | 0,14 0,34 | 0,16 0,39 | 0,19 0,45 | 0,23 0,50 | 0,26 0,58 | 0,30 0,64 | 0,36 0,76 | 0,37 0,79 |
2 | 80 | 110 | 120 | mm/U | 0,12 0,21 | 0,14 0,34 | 0,16 0,39 | 0,19 0,45 | 0,23 0,50 | 0,26 0,58 | 0,30 0,64 | 0,36 0,76 | 0,37 0,79 | |
3 | 50 | 80 | 100 | mm/U | 0,11 0,19 | 0,13 0,27 | 0,15 0,33 | 0,17 0,37 | 0,19 0,42 | 0,21 0,46 | 0,28 0,54 | 0,32 0,63 | 0,33 0,66 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Zoll | ||||||||||||
Bereich SFM | Empfohlener Vorschub pro Umdrehung | |||||||||||||
min. | Startwert | max. | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
P | 0 | 315 | 415 | 575 | IPR (Zoll/U) | .004 .007 | .004 .009 | .005 .012 | .006 .015 | .007 .016 | .007 .018 | .009 .020 | .011 .023 | .011 .024 |
1 | 300 | 430 | 560 | IPR (Zoll/U) | .004 .007 | .004 .009 | .005 .012 | .006 .015 | .007 .016 | .007 .018 | .009 .020 | .011 .023 | .011 .024 | |
2 | 330 | 460 | 590 | IPR (Zoll/U) | .004 .009 | .004 .010 | .005 .013 | .006 .016 | .007 .018 | .007 .019 | .009 .022 | .011 .025 | .011 .026 | |
3 | 200 | 330 | 430 | IPR (Zoll/U) | .004 .011 | .004 .012 | .005 .014 | .006 .016 | .006 .017 | .007 .018 | .009 .020 | .012 .022 | .012 .023 | |
4 | 200 | 330 | 430 | IPR (Zoll/U) | .004 .011 | .004 .012 | .005 .014 | .006 .016 | .006 .017 | .007 .018 | .009 .020 | .010 .022 | .010 .023 | |
5 | 200 | 260 | 330 | IPR (Zoll/U) | .004 .007 | .004 .009 | .004 .011 | .005 .013 | .006 .015 | .006 .016 | .008 .018 | .009 .020 | .010 .021 | |
6 | 200 | 230 | 260 | IPR (Zoll/U) | .004 .007 | .004 .009 | .004 .011 | .005 .013 | .006 .015 | .006 .016 | .008 .018 | .009 .020 | .010 .021 | |
K | 1 | 260 | 400 | 560 | IPR (Zoll/U) | .005 .011 | .005 .013 | .006 .015 | .007 .017 | .009 .019 | .010 .022 | .012 .025 | .014 .030 | .015 .031 |
2 | 260 | 360 | 390 | IPR (Zoll/U) | .005 .011 | .005 .013 | .006 .015 | .007 .017 | .009 .019 | .010 .022 | .012 .025 | .014 .030 | .015 .031 | |
3 | 160 | 260 | 330 | IPR (Zoll/U) | .004 .009 | .005 .010 | .005 .013 | .006 .014 | .007 .016 | .008 .018 | .011 .021 | .013 .025 | .013 .026 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Metrisch | ||||||||||||
Bereich m/min | Empfohlener Vorschub pro Umdrehung | |||||||||||||
min. | Startwert | max. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
M | 1 | 50 | 60 | 90 | mm/U | 0,07 0,13 | 0,08 0,15 | 0,09 0,18 | 0,11 0,20 | 0,12 0,22 | 0,13 0,24 | 0,16 0,28 | 0,19 0,32 | 0,20 0,33 |
2 | 30 | 60 | 90 | mm/U | 0,07 0,13 | 0,08 0,15 | 0,09 0,18 | 0,11 0,20 | 0,12 0,22 | 0,13 0,24 | 0,16 0,28 | 0,19 0,32 | 0,20 0,33 | |
3 | 20 | 50 | 60 | mm/U | 0,07 0,13 | 0,08 0,15 | 0,09 0,18 | 0,11 0,20 | 0,12 0,22 | 0,13 0,24 | 0,16 0,28 | 0,19 0,32 | 0,20 0,33 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Zoll | ||||||||||||
Bereich SFM | Empfohlener Vorschub pro Umdrehung | |||||||||||||
min. | Startwert | max. | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
M | 1 | 160 | 200 | 300 | IPR (Zoll/U) | .003 .005 | .003 .006 | .004 .007 | .004 .008 | .005 .009 | .005 .009 | .006 .011 | .007 .013 | .008 .013 |
2 | 100 | 200 | 300 | IPR (Zoll/U) | .003 .005 | .003 .006 | .004 .007 | .004 .008 | .005 .009 | .005 .009 | .006 .011 | .007 .013 | .008 .013 | |
3 | 70 | 160 | 200 | IPR (Zoll/U) | .003 .005 | .003 .006 | .004 .007 | .004 .008 | .005 .009 | .005 .009 | .006 .011 | .007 .013 | .008 .013 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Metrisch | ||||||||||||
Bereich m/min | Empfohlener Vorschub pro Umdrehung | |||||||||||||
min. | Startwert | max. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
K | 1 | 100 | 175 | 200 | mm/U | 0,12 0,29 | 0,14 0,34 | 0,16 0,39 | 0,19 0,45 | 0,23 0,50 | 0,26 0,58 | 0,30 0,64 | 0,36 0,76 | 0,37 0,79 |
2 | 100 | 160 | 180 | mm/U | 0,12 0,29 | 0,14 0,34 | 0,16 0,39 | 0,19 0,45 | 0,23 0,50 | 0,26 0,58 | 0,30 0,64 | 0,36 0,76 | 0,37 0,79 | |
3 | 70 | 85 | 120 | mm/U | 0,11 0,23 | 0,13 0,27 | 0,15 0,33 | 0,17 0,37 | 0,19 0,42 | 0,21 0,46 | 0,28 0,54 | 0,32 0,63 | 0,33 0,66 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Zoll | ||||||||||||
Bereich SFM | Empfohlener Vorschub pro Umdrehung | |||||||||||||
min. | Startwert | max. | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
K | 1 | 330 | 570 | 660 | IPR (Zoll/U) | .005 .011 | .005 .013 | .006 .015 | .007 .017 | .009 .019 | .010 .022 | .012 .025 | .014 .030 | .015 .031 |
2 | 330 | 520 | 590 | IPR (Zoll/U) | .005 .011 | .005 .013 | .006 .015 | .007 .017 | .009 .019 | .010 .022 | .012 .025 | .014 .030 | .015 .031 | |
3 | 230 | 280 | 390 | IPR (Zoll/U) | .004 .009 | .005 .010 | .005 .013 | .006 .014 | .007 .016 | .008 .018 | .011 .021 | .013 .025 | .013 .026 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Metrisch | |||||||||
Bereich m/min | Empfohlener Vorschub pro Umdrehung | ||||||||||
min. | Startwert | max. | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
S | 4 | 10 | 13 | 20 | mm/U | 0,02–0,08 | 0,03–0,10 | 0,04–0,12 | 0,05–0,16 | 0,05–0,18 | 0,06–0,20 |
N | 1 | 100 | 230 | 270 | mm/U | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 |
2 | 100 | 220 | 270 | mm/U | 0,14–0,23 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
3 | 90 | 180 | 230 | mm/U | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 | |
4 | 90 | 130 | 200 | mm/U | 0,10–0,18 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
C | 2 | 70 | 110 | 140 | mm/U | 0,03-0,10 | 0,04-0,12 | 0,05-0,15 | 0,05-0,18 | 0,06-0,21 | 0,07-0,23 |
3 | 10 | 13 | 20 | mm/U | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 | |
4 | 10 | 20 | 40 | mm/U | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Zoll | |||||||||
Bereich SFM | Empfohlener Vorschub pro Umdrehung | ||||||||||
min. | Startwert | max. | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
S | 4 | 30 | 40 | 70 | IPR | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 |
N | 1 | 330 | 750 | 890 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 |
2 | 330 | 720 | 890 | IPR | .006–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.017 | .013–.021 | |
3 | 300 | 590 | 750 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 | |
4 | 300 | 430 | 660 | IPR | .004–.007 | .006–.011 | .008–.013 | .009–.014 | .011–.016 | .013–.019 | |
C | 4 | 230 | 360 | 460 | IPR (Zoll/min) | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | .003-.009 |
4 | 30 | 40 | 70 | IPR (Zoll/min) | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | |
4 | 30 | 70 | 130 | IPR (Zoll/min) | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Metrisch | |||||||||
Bereich m/min | Empfohlener Vorschub pro Umdrehung | ||||||||||
min. | Startwert | max. | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
C | 1 | 80 | 100 | 150 | mm/U | 0,05 0,20 | 0,05 0,20 | 0,05 0,20 | 0,05 0,20 | 0,05 0,20 | 0,05 0,20 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Zoll | |||||||||
Bereich SFM | Empfohlener Vorschub pro Umdrehung | ||||||||||
min. | Startwert | max. | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
C | 1 | 260 | 330 | 490 | IPR | 0,002 0,008 | 0,002 0,008 | 0,002 0,008 | 0,002 0,008 | 0,002 0,008 | 0,002 0,008 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Metrisch | ||||||||||||
Bereich m/min | Empfohlener Vorschub pro Umdrehung | |||||||||||||
min. | Startwert | max. | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 20,0 | 24,0 | 26,0 | |||
P | 0 | 110 | 140 | 170 | mm/U | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 |
1 | 110 | 140 | 170 | mm/U | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
2 | 100 | 120 | 140 | mm/U | 0,10–0,19 | 0,11–0,22 | 0,13–0,24 | 0,15–0,26 | 0,17–0,29 | 0,19–0,31 | 0,21–0,34 | 0,23–0,38 | 0,24–0,40 | |
3 | 80 | 100 | 120 | mm/U | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
4 | 70 | 90 | 110 | mm/U | 0,10–0,17 | 0,11–0,20 | 0,12–0,22 | 0,14–0,24 | 0,16–0,26 | 0,18–0,28 | 0,20–0,31 | 0,21–0,35 | 0,22–0,36 | |
5 | 60 | 80 | 100 | mm/U | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
6 | 60 | 80 | 100 | mm/U | 0,09–0,16 | 0,10–0,18 | 0,11–0,20 | 0,13–0,22 | 0,15–0,24 | 0,16–0,26 | 0,18–0,29 | 0,19–0,33 | 0,20–0,34 | |
M | 1 | 40 | 60 | 80 | mm/U | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 |
2 | 35 | 55 | 70 | mm/U | 0,07–0,12 | 0,08–0,14 | 0,09–0,16 | 0,11–0,18 | 0,12–0,20 | 0,13–0,22 | 0,14–0,24 | 0,15–0,26 | 0,16–0,27 | |
K | 1 | 90 | 120 | 175 | mm/U | 0,12-0,21 | 0,14-0,24 | 0,16-0,28 | 0,18-0,32 | 0,20-0,36 | 0,22-0,40 | 0,25-0,44 | 0,28-0,48 | 0,29-0,50 |
2 | 80 | 110 | 140 | mm/U | 0,12–0,21 | 0,14–0,24 | 0,16–0,28 | 0,18–0,32 | 0,20–0,36 | 0,22–0,40 | 0,25–0,44 | 0,28–0,48 | 0,29–0,50 | |
3 | 70 | 80 | 100 | mm/U | 0,11-0,19 | 0,13-0,22 | 0,14-0,25 | 0,16-0,28 | 0,18-0,32 | 0,21-0,36 | 0,23-0,40 | 0,26-0,44 | 0,27-0,46 |
Werkstoffgruppe | Schnittgeschwindigkeit vc | Zoll | ||||||||||||
Bereich SFM | Empfohlener Vorschub pro Umdrehung | |||||||||||||
min. | Startwert | max. | .236 | .315 | .394 | .472 | .551 | .630 | .787 | .945 | 1.023 | |||
P | 0 | 360 | 460 | 560 | IPR (Zoll/U) | 0.004–0.007 | 0.004–0.009 | 0.005–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.012 | 0.008–0.013 | 0.009–0.015 | 0.009–0.016 |
1 | 360 | 460 | 560 | IPR (Zoll/U) | 0.004–0.007 | 0.004–0.009 | 0.005–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.012 | 0.008–0.013 | 0.009–0.015 | 0.009–0.016 | |
2 | 330 | 400 | 460 | IPR (Zoll/U) | 0.004–0.007 | 0.004–0.009 | 0.005–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.012 | 0.008–0.013 | 0.009–0.015 | 0.009–0.016 | |
3 | 260 | 330 | 400 | IPR (Zoll/U) | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.008–0.012 | 0.008–0.014 | 0.009–0.014 | |
4 | 230 | 330 | 360 | IPR (Zoll/U) | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.008–0.012 | 0.008–0.014 | 0.009–0.014 | |
5 | 200 | 260 | 330 | IPR (Zoll/U) | 0.004–0.006 | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.013 | 0.008–0.013 | |
6 | 200 | 260 | 330 | IPR (Zoll/U) | 0.004–0.006 | 0.004–0.007 | 0.004–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.007–0.011 | 0.007–0.013 | 0.008–0.013 | |
M | 1 | 130 | 200 | 260 | IPR (Zoll/U) | 0.003–0.005 | 0.003–0.006 | 0.004–0.006 | 0.004–0.007 | 0.005–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.006–0.011 |
2 | 120 | 180 | 230 | IPR (Zoll/U) | 0.003–0.005 | 0.003–0.006 | 0.004–0.006 | 0.004–0.007 | 0.005–0.008 | 0.005–0.009 | 0.006–0.009 | 0.006–0.010 | 0.006–0.011 | |
K | 1 | 300 | 400 | 580 | IPR (Zoll/U) | 0.005-0.008 | 0.006-0.009 | 0.006-0.011 | 0.007-0.013 | 0.008-0.014 | 0.009-0.016 | 0.010-0.017 | 0.011-0.019 | 0.011-0.020 |
2 | 260 | 360 | 460 | IPR (Zoll/U) | 0.005–0.008 | 0.006–0.009 | 0.006–0.011 | 0.007–0.013 | 0.008–0.014 | 0.009–0.016 | 0.010–0.017 | 0.011–0.019 | 0.011–0.020 | |
3 | 230 | 260 | 330 | IPR (Zoll/U) | 0.004-0.007 | 0.005-0.009 | 0.006-0.010 | 0.006-0.011 | 0.007-0.013 | 0.008-0.014 | 0.009-0.016 | 0.010-0.017 | 0.011-0.018 |